WHITE LACQUER 820
- Weißlack
SCOPE OF APPLICATION
The white lacquer coating is intended for painting wood, metal and neutral stone indoors.
features
- Forms an elastic vapor-permeable coating
- Keeps pores open
- Good covering and filling ability
- Not suitable for painting batteries
The maximum content of Volatile Organic Compounds (VOC) in this product is 300 g/l. European standard VOC no more than 400 g/l (Category “F” since 2010).
2.5 l
1 layer
29.5 m2
2 layer
17.7 m2
Painting of rooms with high humidity
Stir the oil before use! To apply, use a brush, roller or spray. The temperature of the room and the treated surface must be at least 15 °C. Apply two coats of oil with intermediate drying. Always do a trial coloring.
Brush
Roller
Spray gun
А
Initial coloring
The wood must be strong, free from dust and dirt. To increase the durability and depth of oil absorption, the surface must be prepared by grinding with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-P80. Before painting, make sure that the surface is dry.
В
Updating the surface previously painted with white Varnish art. 820
Remove dust, dirt and protruding resin. Before painting, make sure that the surface is dry. Sand the damaged surfaces. It is enough to apply one layer of oil to upgrade.
С
Updating the surface previously painted with non-natural paint or varnish.
Completely remove the old coating in any way. Finish grinding with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-P80. Before painting, make sure that the surface is dry.
Carefully read the technical instructions of each composition used
At a temperature of 20 ° C and average humidity, drying takes 16-24 hours. A decrease in temperature and an increase in humidity slow down the drying process. When painting indoors, in order to dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation.
A sufficient amount of oxygen in the air is needed to dry the composition.
Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.
Immediately after work, use white spirit solvent or a similar solvent to clean the tool.
The product is not self-igniting
To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water
When drying, ensure sufficient air exchange
Keep out of reach of children
In case of ingestion and ingestion — do not induce vomiting!
Seek medical help by presenting the technical instructions or the product label to the doctor!
Ensure respiratory protection when spraying.
Avoid contact with the environment.
Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.
Due to the natural substances included in the product, a specific smell is possible.
Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.
According to the official rules. Disposal Code: EAK/EWC 08 01 11
You can consult and buy our products from a LEINOS dealer in your city