Exclusive partner of the Reincke Naturfarben GmbH plant in India



For painting well-absorbing large-porous surfaces indoors. It is used when applying oil by immersion, as well as for surfaces in need of special treatment.


– Linseed oil
– standard of wood oil
– linseed oil standard
– Isoparaffin
– boiled wood and castor oils and natural resins
– Co/Zr/Zn/Mn

The maximum content of volatile organic compounds (VOC) in this product is 530 g/l. European standard VOC no more than 700 g/l (category F c 2010).

60-80 ml

1 m2

Stir the oil before use!

Always do a trial coloring. Do not pour oil into cracks and joints of products. Surfaces subject to intense mechanical loads (stairs, corridors, kitchen) are recommended to be covered in three layers.


Application with polishing

Apply the oil in a uniform thin layer on the entire surface to be painted using a brush or roller. Let the oil soak into the wood for 15-20 minutes. Unpolish the unpolished oil with a polishing pad. After 16-24 hours, apply a second layer and polish with a polishing pad. If the surface turns out to be rough after the first layer, perform interlayer grinding with a fine abrasive (P400-P600). Carefully remove dust before reapplying. For additional protection, the surface can be treated with a third, colorless layer of oil.


Application without polishing

Apply the oil evenly in a thin layer, avoiding visible stains and smudges with a roller or brush. The painted surface should have a uniform light reflection during painting. Leave to dry. After 16-24 hours, apply a second layer. Use the recommendations for interlayer sanding and additional protection from point A.


Application on previously painted surfaces

Carefully remove the old coating covering the pores. The coating that does not close the pores should be cleaned, if necessary, updated. Then apply the product in the manner described above (A). Waxed surfaces can also be treated with LEINOS No. 246 solid furniture oil, provided that the wax is thoroughly removed before doing so. Always do a trial coloring.



Spray gun



For optimal results, read the technical instructions of all products used. The surface must be dry, durable, clean, well absorbent, free of grease and dust. Pre-sand the wood in the direction of the wood fibers with an abrasive material with a grain size of 150-180.

Carefully read the technical instructions of each composition used

At a temperature of 20 ° C and average humidity, drying takes 16-24 hours. A decrease in temperature and an increase in humidity slow down the drying process. When painting indoors, in order to dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation.

A sufficient amount of oxygen in the air is needed to dry the composition.

Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.

Immediately after work, use white spirit solvent or a similar solvent to clean the tool.

The product is not self-igniting

To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water

When drying, ensure sufficient air exchange

Keep out of reach of children

In case of ingestion and ingestion — do not induce vomiting!

Seek medical help by presenting the technical instructions or the product label to the doctor!

Ensure respiratory protection when spraying.

Avoid contact with the environment.

Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.

Due to the natural substances included in the product, a specific smell is possible.

Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.

According to the official rules. Disposal Code: EAK/EWC 08 01 11

You can consult and buy our products from a LEINOS dealer in your city


Scroll to Top