SOLVENT-FREE SINGLE-LAYER COATING OIL 249
- Rapidöl LF
SCOPE OF APPLICATION
The oil is designed to protect furniture, walls and ceilings made of solid wood. Ideal for repair work
features
- Does not contain solvent
- It is applied in one layer
- Forms a strong, elastic and antistatic coating
- Keeps the pores of wood open
- Not suitable for kitchen countertops, stairs and floors
- Tested for resistance to saliva and sweat according to DIN 53 160
The maximum content of Volatile Organic Compounds (VOC) in this product is 1 g/l. European standard VOC no more than 400 g/l (Category “F” since 2010).
0.125 l
1 layer
8 m2
1 l
2 layer
64 m2
2.5 l
1 layer
160 m2
10 l
2 layer
640 m2
Standard scheme
Stir the oil before use!
Always do a trial coloring.
Apply the oil in a thin layer with a brush or roller at a room temperature above 15 ° C (for cold application and application with heating). Let the oil soak in, and then gently treat the surface with a polishing machine with a polishing pad. The drying time of this oil is slightly longer than usual.
Please note: there should be no cracks or large cracks in the floors, or they should be patched! In the presence of cracks and crevices, oil may flow into them, and the creaking of the floor when walking may increase after the oil dries.
А
When applying a heated coating
Carry out deep impregnation by applying a single layer. Apply Solid oil art. 248 in a thin layer on the floor surface. Then carefully treat the surface with a heated polishing machine.
Brush
Roller
Polishing pad
А
The base must be dry, strong, clean, free of dust and dirt. To achieve furniture quality and increase the uniformity of oil absorption, make grinding with an abrasive material with a grain size of P120-P180.
Carefully read the technical instructions of each composition used
At a temperature of 23 ° C and a relative humidity of 50%, drying after 24 hours. The supply of warm air reduces the drying time. To dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation. Complete drying and resistance to loads after 7-10 days.
A sufficient amount of oxygen in the air is needed to dry the composition.
Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.
Immediately after work, use white spirit solvent or a similar solvent to clean the tool.
The product is not self-igniting
To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water
When drying, ensure sufficient air exchange
Keep out of reach of children
In case of ingestion and ingestion — do not induce vomiting!
Seek medical help by presenting the technical instructions or the product label to the doctor!
Ensure respiratory protection when spraying.
Avoid contact with the environment.
Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.
Due to the natural substances included in the product, a specific smell is possible.
Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.
According to the official rules. Disposal Code: EAK/EWC 08 01 11
You can consult and buy our products from a LEINOS dealer in your city
