SOLVENT-FREE PARQUET OIL 253
- Parkettöl LF
SCOPE OF APPLICATION
The oil is intended for floors and stairs subjected to heavy mechanical stress. Ideal for repair work.
features
- Economical consumption
- Does not contain solvent
- Oil and resin create a protective film, so that the surface is easy to care for
- Creates a damage-resistant surface
- Restores color and gives a velvety shine
- Keeps the pores of wood open
- Tested for resistance to saliva and sweat according to DIN 53 160
The maximum content of Volatile Organic Compounds (VOC) in this product is 1 g/l. European standard VOC no more than 400 g/l (Category “F” since 2010).
0.125 l
1 layer
5.6 m2
2 layer
4.5 m2
2.5 l
1 layer
112 m2
2.5 l
2 layer
90 m2
1 l
1 layer
45 m2
2 layer
36 m2
10 l
1 layer
450 m2
10 l
2 layer
360 m2
Standard scheme
Stir the oil before use!
Always do a trial coloring.
The recommended air and surface temperature is above 16 ° C, a decrease in temperature increases the drying time of the composition.
Please note: there should be no cracks or large cracks in the floors, or they should be patched! In the presence of cracks and crevices, oil may flow into them, and the creaking of the floor when walking may increase after the oil dries.
А
Apply parquet oil evenly to the surface with a spatula (approximately 15-30 ml/m2, depending on the type of wood). Then carefully polish with a disc grinder with a green pad, and finish polishing with a white pad. In case of high mechanical load on the surface, another, but thinner layer of oil should be applied the next day. After 20-30 minutes after application, polish the surface with a white pad. Avoid excessive and uneven application!
Polishing pad
А
The base must be dry, strong, clean, free of dust and dirt. To achieve furniture quality and increase the uniformity of oil absorption, make grinding with an abrasive material with a grain size of P120-P180.
Carefully read the technical instructions of each composition used
At a temperature of 20 ° C and average humidity, surface drying takes 10-12 hours. The time of readiness for re-processing is in 16-24 hours. To dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation. Complete drying and resistance to loads after 7-10 days.
A sufficient amount of oxygen in the air is needed to dry the composition.
Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.
Immediately after work, use white spirit solvent or a similar solvent to clean the tool.
The product is not self-igniting
To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water
When drying, ensure sufficient air exchange
Keep out of reach of children
In case of ingestion and ingestion — do not induce vomiting!
Seek medical help by presenting the technical instructions or the product label to the doctor!
Ensure respiratory protection when spraying.
Avoid contact with the environment.
Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.
Due to the natural substances included in the product, a specific smell is possible.
Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.
According to the official rules. Disposal Code: EAK/EWC 08 01 11
You can consult and buy our products from a LEINOS dealer in your city