Exclusive partner of the Reincke Naturfarben GmbH plant in India



The paint is intended for priming surfaces before applying Varnish Art. 820. Cleans well and eliminates gray plaque, brightening the surface of wood. It is suitable for both soft and hard wood, thanks to the citrus fruit enzymes included in the composition, coconut oil fatty acids and oxalic acid, identical to natural.


– Castor oil
– castor oil standard
– zinc carbonate
– chalk
– fatty acid ester
– safflower oil
– ether of natural resins
– titanium dioxide
– talcum powder
– standard of wood oil
– aluminum oxide
– barit
– isoparaffin

The maximum content of volatile organic compounds (VOC) in this product is 200 g/l. European standard VOC no more than 700 g/l (category F c 2010).

2.5 l

1 layer

36 m2

Application to an untreated or absorbent surface

Mix before use. The first application is a thin layer at a temperature of at least 15 ° C. Then it is possible to use white LEINOS Varnish Art. 820.


Updating coverage

Remove the damaged coating thoroughly. Further application – in the manner described (point A). Undamaged coating after thorough sanding and compatibility test is immediately treated with white LEINOS Varnish Art. 820. Always do a trial coloring.

In rooms with high humidity, it is recommended to treat wooden surfaces in three layers.



Spray gun


Apply with a brush, spray gun or roller. The temperature of the room and the treated surface must be at least 15 °C. Mix the product thoroughly before use. The surface must be dry, strong, clean, free of grease and dust. Do not use on absorbent surfaces.

Carefully read the technical instructions of each composition used

At a temperature of 20 ° C and average humidity, drying takes 16-24 hours. A decrease in temperature and an increase in humidity slow down the drying process. When painting indoors, in order to dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation.

A sufficient amount of oxygen in the air is needed to dry the composition.

Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.

Immediately after work, use white spirit solvent or a similar solvent to clean the tool.

The product is not self-igniting

To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water

When drying, ensure sufficient air exchange

Keep out of reach of children

In case of ingestion and ingestion — do not induce vomiting!

Seek medical help by presenting the technical instructions or the product label to the doctor!

Ensure respiratory protection when spraying.

Avoid contact with the environment.

Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.

Due to the natural substances included in the product, a specific smell is possible.

Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.

According to the official rules. Disposal Code: EAK/EWC 08 01 11

You can consult and buy our products from a LEINOS dealer in your city


Scroll to Top