LIGHT SOLID OIL 241
- Hartöl Hell
SCOPE OF APPLICATION
Azure is designed to protect wooden walls, ceilings and doors indoors from dirt, moisture and dust. Gives the surface a silky shine and a bright saturated color.
features
- Creates a durable primer layer
- For processing floors, doors, furniture and countertops
- It is well absorbed
- Practically does not yellow the surface
- Vapor permeable
- Keeps the pores of wood open
The maximum content of Volatile Organic Compounds (VOC) in this product is 510 g/l. European standard VOC no more than 700 g/l (Category “F” since 2010).
0.125 l
1 layer
2 m2
0.125 l
2 layers
1.5 m2
2.5 l
1 layer
40 m2
2.5 l
2 layers
30 m2
1 l
1 layer
16 m2
1 l
2 layers
12 m2
10 л
1 layer
160 m2
10 л
2 layers
120 m2
Stir the oil before use! Natural oil is ready for use. Before painting, make sure that the surface is dry.
Use a brush, roller or spray gun to apply.
It is necessary to apply the oil in a uniform thin layer, avoiding streaks and streaks. Avoid oil getting into cracks and joints of products. Regardless of the method of application, the non-saturated oil (puddles, thick layer) must be removed or spread with a brush on dry areas. Always do a trial coloring. It is recommended to apply the oil in two layers with intermediate drying. When roughness is formed after the first layer, use manual interlayer grinding with an abrasive scotch-bright material with a grain size of P320 or an abrasive mesh with a grain size of P400-P600.In rooms with high humidity, it is recommended to treat wooden surfaces in three layers.
Brush
Roller
Spray gun
Dipping
А
Absorbent, clean surface
The wood must be strong, free from dust and dirt. Painting of unprepared wood is possible. To achieve furniture quality and increase the uniformity of oil absorption, grind with an abrasive material with a grain size of P100-P120 or with an abrasive brush with a grain size of P46-P80.
В
Updating the surface previously painted with oil
Remove dust, dirt and protruding resin. For renewal, it is enough to apply one layer of Light solid oil art. 241.
С
Updating the surface previously painted with non-natural paint or varnish
Completely remove the old coating in any way. Finish grinding with an abrasive material with a grain size of P100-P120 or with an abrasive brush with a grain size of P46-P80.
Carefully read the technical instructions of each composition used
At a temperature of 20 ° C and average humidity, drying takes 16-24 hours. A decrease in temperature and an increase in humidity slow down the drying process. When painting indoors, in order to dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation.
A sufficient amount of oxygen in the air is needed to dry the composition.
Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.
Immediately after work, use white spirit solvent or a similar solvent to clean the tool.
The product is not self-igniting
To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water
When drying, ensure sufficient air exchange
Keep out of reach of children
In case of ingestion and ingestion — do not induce vomiting!
Seek medical help by presenting the technical instructions or the product label to the doctor!
Ensure respiratory protection when spraying.
Avoid contact with the environment.
Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.
Due to the natural substances included in the product, a specific smell is possible.
Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.
According to the official rules. Disposal Code: EAK/EWC 08 01 11
You can consult and buy our products from a LEINOS dealer in your city
