WEATHER-RESISTANT PAINT-OIL 850
- Wetterschutzfarbe
SCOPE OF APPLICATION
Oil-based paint for long-term protection of house facades, timber ends, logs and other vertical surfaces. It can be used as a base coat or as a finishing layer.
features
- It has a good covering ability due to its thick consistency
- Forms a dense and elastic vapor-permeable coating
- Great for sawn wood
- Protects the end surfaces well from cracking
- Protects against atmospheric influences
- Does not peel and does not crack over time
- Contains an additive against fungus, blue and mold
The maximum content of Volatile Organic Compounds (VOC) in this product is 290 g/l. European standard VOC no more than 400 g/l (Category “F” since 2010).
1 l
1 layer
14 m2
2 layer
9 m2
2.5 l
1 layer
35 m2
2 layer
22.5 m2
10 l
1 layer
140 m2
2 layer
90 m2
Standard scheme
Mix the paint before use. To apply, use a brush, roller or spray gun. It is necessary to apply a uniform thin layer, avoiding streaks and streaks. Always do a trial coloring.
To protect surfaces with normal atmospheric load (facades, fences, etc.), pre-priming with primer oil for wood art. 150 is recommended. After the primer oil has dried, apply two coats of Weather-resistant oil paint No. 850 with intermediate drying.
Brush
Roller
Spray gun
А
Pre-primed wood with primer oil for wood art. 150
The surface is ready to apply weather-resistant oil paint.
В
Absorbent, clean surface
The wood must be strong, free from dust and dirt. To increase the durability and depth of absorption of the paint, it is necessary to grind with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-80.
С
Updating the surface previously painted with oil
Remove dust, dirt and protruding resin. Before painting, make sure that the surface is dry. It is enough to apply one layer of paint to update.
D
Updating the surface previously painted with non-natural paint or varnish
Completely remove the old coating in any way. Finish grinding with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-P80. Before painting, make sure that the surface is dry. Carefully read the technical instructions of each composition used.
Carefully read the technical instructions of each composition used
At a temperature of 20 ° C and average humidity, surface drying takes 10-12 hours. The time of complete drying and readiness for re-treatment in 16-24 hours. To dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation.
A sufficient amount of oxygen in the air is needed to dry the composition.
Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.
Immediately after work, use white spirit solvent or a similar solvent to clean the tool.
The product is not self-igniting
To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water
When drying, ensure sufficient air exchange
Keep out of reach of children
In case of ingestion and ingestion — do not induce vomiting!
Seek medical help by presenting the technical instructions or the product label to the doctor!
Ensure respiratory protection when spraying.
Avoid contact with the environment.
Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.
Due to the natural substances included in the product, a specific smell is possible.
Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.
According to the official rules. Disposal Code: EAK/EWC 08 01 12
