Exclusive partner of the Reincke Naturfarben GmbH plant in India



Oil for impregnation or care of all types of outdoor wood surfaces, such as fences, gazebos, children’s play equipment, terraces and teak garden furniture


– Linseed oil
– Isoparaffin
– Castor oil
– iodine-propinyl-butyl-carbamate
– Wood oil

The maximum content of Volatile Organic Compounds (VOC) in this product is 420 g/l. European standard VOC no more than 700 g/l (Category “F” since 2010).

0.125 l

1 layer

2 m2

2 layers

1.5 m2

2.5 l

1 layer

41.5 m2

2 layers

30 m2

1 l

1 layer

16.6 m2

2 layers

12 m2

10 l

1 layer

166 m2

2 layers

120 m2

Do not use at temperatures below 10°C. Stir the oil before use! Natural oil is ready for use. Before painting, make sure that the surface is dry. To apply, use a brush, brush or roller. It is necessary to apply the oil in a uniform thin layer, avoiding streaks and streaks. The non-saturated oil (puddles, thick layer) must be removed or spread with a brush on dry areas. Apply two coats of oil with intermediate drying. Highly absorbent wood must be painted in three layers. Always do a trial coloring.



Spray gun


Absorbent, clean surface

The wood must be strong, free from dust and dirt. To increase the durability and depth of oil absorption, it is necessary to grind with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-P80. Important! The color of larch. The highly resinous and dense structure of larch prevents the adhesion and absorption of oil. Before applying the oil, it is recommended to clean the painted surface of the larch from resin.


Updating the surface previously painted with Teak oil

Remove dust, dirt and protruding resin. Already grayed wood should be sanded to a light surface, if possible, or pre-treated with LEINOS Gray Plaque Cleaner art. 940. Applying one layer is enough for updating.


Updating the surface previously painted with non-natural paint or varnish

Completely remove the old coating in any way. Finish grinding with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-P80. Carefully read the technical instructions of each composition used.

Carefully read the technical instructions of each composition used

At a temperature of 20 °C and medium humidity, it dries and is ready for re-treatment in 16-24 hours. Provide forced ventilation in the room.

A sufficient amount of oxygen in the air is needed to dry the composition.

Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.

Immediately after work, use white spirit solvent or a similar solvent to clean the tool.

The product is not self-igniting

To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water

When drying, ensure sufficient air exchange

Keep out of reach of children

In case of ingestion and ingestion — do not induce vomiting!

Seek medical help by presenting the technical instructions or the product label to the doctor!

Ensure respiratory protection when spraying.

Avoid contact with the environment.

Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.

Due to the natural substances included in the product, a specific smell is possible.

May cause an allergic reaction.

Standard scheme

1 layer

2 layer

Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.

According to the official rules. Disposal Code: EAK/EWC 08 01 11

You can consult and buy our products from a LEINOS dealer in your city


On the oak tree

Scroll to Top