Exclusive partner of the Reincke Naturfarben GmbH plant in India



🏛️ Robust Exterior Protection: Facade Stain 264 is specially formulated to protect and enhance the aesthetic appeal of exterior surfaces. This high-quality stain provides superior protection against the elements, making it an ideal choice for facades, windows, and doors.

🌈 Stunning Exterior Paint Shades: Available in elegant shades, including the sophisticated earl gray paint color, this product offers a wide range of exterior paint shades designed to complement any architectural style. The grey colour wall paint option is perfect for achieving a modern and timeless look.

Waterproof and Weather-Resistant: With enhanced waterproof capabilities, Facade Stain 264 shields surfaces from rain and moisture, preventing damage and prolonging the life of your woodwork.

🌞 Enhanced UV Protection: This stain is engineered with increased UV protection to prevent fading and maintain the vibrancy of the paint color over time, ensuring your exterior remains attractive year after year.

🔧 Durable and Long-Lasting: Designed to withstand the rigors of outdoor conditions, our Facade Stain 264 does not peel or crack, maintaining its integrity and appearance for years to come.

🌿 Eco-Friendly and Permeable: Not only does this product keep the pores of wood open, allowing the material to breathe and preventing rot, but it is also vapor permeable and eco-friendly, aligning with sustainable building practices.

Experience the ultimate in exterior wood protection with Facade Stain 264. Choose our reliable and beautifully tinted solutions to enhance the durability and aesthetic appeal of your building’s exterior.


– Castor oil, combined by heating with natural resin
– kaolin
– micronized wax
– natural asphalt
– Ether of natural resins
– zinc oxide
– Isoparaffin
– mineral pigments
– standard of wood oil
– clay
– silica
– iodine-propinyl-butyl-carbamate

The maximum content of Volatile Organic Compounds (VOC) in this product is 400 g/l. European standard VOC no more than 700 g/l (Category “F” since 2010).

0.125 l

1 layer

2 m2

2 layer

1.3 m2

2.5 l

1 layer

40 m2

2 layer

27.5 m2

1 l

1 layer

16 m2

2 layer

11 m2

10 l

1 layer

160 m2

2 layer

110 m2

The recommended temperature of the air and the treated surface is above 12 °C. Stir the oil before use. To apply, use a brush, roller or spray gun. It is necessary to apply a uniform thin layer, avoiding streaks and streaks. Always do a trial coloring.


To protect surfaces with normal atmospheric load (facades, fences, etc.)

It is recommended to pre-priming with primer oil for wood art. 150. After drying the primer oil, apply two layers of Metallic azure oil art. 264 with intermediate drying.


To protect surfaces with low atmospheric load (roof overhangs, gazebo ceilings, etc.)

It is allowed to apply two layers of azure metallic Oil art. 264 with intermediate drying, without prior priming.



Spray gun


Pre-primed wood with primer oil for wood art. 150.

The surface is ready to apply facade oil.


Absorbent, clean surface.

The wood must be strong, free from dust and dirt. To increase the durability and depth of oil absorption, it is necessary to grind with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-80.


Updating the surface previously painted with oil.

Remove dust, dirt and protruding resin. Before painting, make sure that the surface is dry. It is enough to apply one layer of oil to upgrade.


Updating the surface previously painted with non-natural paint or varnish.

Completely remove the old coating in any way. Finish grinding with an abrasive material with a grain size of P80-P100 or an abrasive brush with a grain size of P46-P80. Before painting, make sure that the surface is dry. Carefully read the technical instructions of each composition used.

Carefully read the technical instructions of each composition used

At a temperature of 20 ° C and average humidity, drying takes 16-24 hours. A decrease in temperature and an increase in humidity slow down the drying process. When painting indoors, in order to dry the composition and avoid the formation of a specific odor, it is recommended to ventilate the room and use forced ventilation.

A sufficient amount of oxygen in the air is needed to dry the composition.

Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.

Immediately after work, use white spirit solvent or a similar solvent to clean the tool.

The product is not self-igniting

To avoid fire, oil-soaked working materials, such as fabrics, sponges, as well as abrasive dust with low-dried oil, should be placed in a metal container or in water

When drying, ensure sufficient air exchange

Keep out of reach of children

In case of ingestion and ingestion — do not induce vomiting!

Seek medical help by presenting the technical instructions or the product label to the doctor!

Ensure respiratory protection when spraying.

Avoid contact with the environment.

Residues should not be disposed of in the soil or sewage. Dispose of the contents/container for appropriate recycling.

Due to the natural substances included in the product, a specific smell is possible.

Store in a cool, dry place, do not freeze. Shelf life in a closed package is at least 2 years.

According to the official rules. Disposal Code: EAK/EWC 08 01 13

You can consult and buy our products from a LEINOS dealer in your city



Scroll to Top