AZURE-BINDER 646
Home » Azure-binder 646
- Lasur-Binder
SCOPE OF APPLICATION
Transparent binding azure. It is used as a binder in combination with Concentrated pigments LINOS No. 668. To create a colored, vapor-permeable and decorative wall surface indoors.
features
- Transparent binder
- High vapor permeability
- Does not turn yellow with time
- Diluted with water
- Highly concentrated composition
The maximum content of Volatile Organic Compounds (VOC) in this product is 1 g/l. European standard VOC no more than 30 g/l (Category “F” since 2010).
1 l
15 m2
Brush
Cloth
Sponge
Stir before use!
The room and surface temperature should be at least 15 ° C. Apply with a brush, brush, sponge or cotton cloth, depending on the selected decorative effect. The temperature of the room and the treated surface must be at least 15 °C. Always do a trial coloring.
Application
1. Apply the first layer of Dispersion paint LINOS No. 660
2. Dissolve Azure No. 646 in water in proportions of 1:5 or 1:6.
3. Add the required amount of Concentrated Pigment No. 668 to the solution. When adding pigment, mix the solution with a whisk.
4. Apply the composition evenly to the surface so that it does not dry out partially, and noticeable joints do not form during breaks in application. After intermediate drying (after 2-4 hours), the next layer can be applied.
You need at least two, or better, three layers. At the same time, always start working from the illuminated areas towards the more shaded ones. Do not apply more than 2-3 layers of Azure per day, so that the surface is not soaked with water and does not become soft.
Please pay attention:
During processing, it is necessary to constantly mix the solution!
А
It can be applied only to the composition of LINOS: Art. 660.
Carefully read the technical instructions of each composition used
At a temperature of 20 ° C and a relative humidity of 50% for about 2-4 hours. Complete drying after about 24 hours. A large amount of air is required for drying, so it is necessary to ensure good ventilation of the room
A sufficient amount of oxygen in the air is needed to dry the composition.
Regularly ventilate the room well. In order to avoid the formation of a specific odor, it is recommended to use sources of constantly circulating air, for example, fans.
Immediately after work, use water and natural soap LEINOS art. 930 to clean the tool.
Keep out of reach of children
It is an alkaline product. Protect your eyes and skin from splashes.
Ensure proper protection of surfaces that should not be covered with paint.
Any droplets that hit the surrounding surfaces should be immediately washed off with plenty of water.
Store in a cool, dry place, do not freeze. Shelf life in a closed package is 12 months.
According to the official rules. Disposal Code: EAK/EWC 08 01 20